Specification
- CPU: 500 MHz AMD Geode LX800
- DRAM: 256 MB DDR DRAM
- Storage: CompactFlash socket
- Power: DC jack or passive POE, min. 7V to max. 20V
- Three LEDs
- Expansion: 2 miniPCI slots, LPC bus
- Connectivity: 1 Ethernet channel (Via VT6105M 10/100)
- I/O: DB9 serial port, dual USB, VGA, audio headphone out / microphone in
- RTC battery
- Board size: 100 x 160 mm
- Firmware: Award BIOS
Customer options
ALIX.3D changes
- Add CMOS reset jumper.
- Soldering option for line in instead of MIC.
- Add test points for S/PDIF interface.
- Increase USB current limit.
- Add test points at switch pins for easier console restore.
- Populate buzzer driver circuit.
- Change J4 header to COM2.
- Add optional power in header.
- Reduce conducted EMI on DC jack.
- Add second Poscap on 3.3V rail to ruggedise for high power radios.
|
Documentations
Driver (Windows XP,XPe)
- Network (Media: Rhine_driver_v60_via.zip)
- VGA (Media: GeodeLX_XP_XPe_Graphics_v3.03.06.zip)
- Audio (Media: GeodeLX_XP_XPe_WDM_Samba_Audio_v3.00.00.zip)
- Crypto Driver (Media:GeodeLX_XP_WDM_AES_v2.01.00.zip)
Driver (Windows 2000)
- Network (Media: Rhine_driver_v60_via.zip)
- VGA (Media: GEODE-LX-Win2k_VGA.zip)
- Audio (Media: GeodeLX_XP_XPe_WDM_Samba_Audio_v3.00.00.zip)
- Crypto Driver (Media:GeodeLX_XP_WDM_AES_v2.01.00.zip)
BIOS updates
Please note that this board uses Award BIOS, tinyBIOS does not support VGA...!!!
- beta Fix LEDs, VGA DDC issue (boot hang), free up MFGPT timers (Alixbio7-3.zip).
- 10/06/08 Default = UART port B disable. Please use zapcmos.exe when upgrading to make sure it sticks... (Alixbio6-3.zip).
- 7/01/08 fixed serial port (see advanced chipset menu, scroll down) (Alixbio4-3.zip).
CMOS reset
alix3c3 does not have a CMOS reset jumper. If the board does not start due to bad setup options, please try this (CMOS reset procedure) procedure.
|
